# Configuring BLF on Cisco SPA

This page reorganizes the operational steps for **Configuring BLF on Cisco SPA**.

Cisco SPA can be tricky even for basic configurations. In this case, we use a Cisco SPA504G to configure BLF for some phones.

\# Open the phone administration in your browser.

\# Login as administrator and open advanced configuration.

\# Select the "Attendant Console” screen.

It is important to set "Asterisk" for the server type:

400px

In the BLF key section, to monitor extension 104 in tenant DEVEL, use a string like:

fnc=blf+sd+cp;sub=104-DEVEL@$PROXY

For the direct pickup to work, you need to specify the feature code you have chosen in the "Attendant Console Call Pickup Code". Use something like \*56# if you have specified \*56\[EXT\] as Direct Pickup Code in MiRTA PBX

## Current Verification

After applying the change, verify the related MiRTA PBX page, the Asterisk logs, and the relevant Status menu entry. Recheck tenant selection before testing tenant-specific behavior.