DISAs
Overview
The DISAs page creates DISA access points for authenticated outbound calling through the PBX. Open it from Configuration > More Configuration > DISAs.
The page works against the tenant currently selected in the top bar. The screenshots and demo rows were captured in the Canistracci OIL tenant.
Working with objects
| Task | How to do it |
|---|---|
| Add | Select the New DISA action, complete the form, and select Save. |
| Edit | Open the DISA from the list by selecting its name, number, or row action. Change the form and select Save. |
| Delete | Select the row checkbox and use Delete Selected, or open the DISA and select Delete, then confirm. |
Page functions
| Action | Description |
|---|---|
| New DISA | Opens the creation form for a new disa. |
| Delete Selected | Deletes the selected rows after confirmation. |
List columns
| Column | Description |
|---|---|
| Name | Display name used in lists and references. |
| Recording | Recording behavior or recording delivery setting. |
| PIN | Credential or PIN value. Treat it as sensitive. |
| Outbound | Object setting shown by the form. |
| CallerID | Caller ID or caller matching value. |
Demo records
The tenant contains 1 documentation demo record for this page: Docs Demo DISA 1.
Deleting records
Before deleting a DISA, check references from call flows, destinations, schedules, reports, or provisioning objects. MiRTA PBX asks for confirmation before the delete is submitted.
Create and Edit DISAs
Use this page when creating a new DISA or editing an existing DISA from Configuration > DISAs.
The form screenshots below are separated by block where the application exposes separate sections. Complete the required values, review routing or destination references, and save the record.
Add and edit form
Main fields
| Field | Description |
|---|---|
| Name: | Display name used in lists and references. |
| Welcome Message: | Object setting shown by the form. |
| PIN: | Credential or PIN value. Treat it as sensitive. |
| Digits Timeout: | Timing value used by the service. |
| Response Timeout: | Timing value used by the service. |
| Loop on attempt | Object setting shown by the form. |
| Allow outbound calls | Object setting shown by the form. |
| Block External Caller ID | Caller ID or caller matching value. |
| Use CID Number: | Dialed value, identifier, or matching value used by the PBX. |
| Use CID Name: | Display name used in lists and references. |
Saving and deleting
| Task | How to do it |
|---|---|
| Create | Select the new action from the DISAs list, fill the required fields, and select Save. |
| Edit | Open the existing DISA, update the needed fields, and select Save. |
| Delete | Before deleting a DISA, check call-flow, destination, schedule, report, provisioning, or integration references. Use the row delete action or the form delete action when available, then confirm. |